Trunk foam mixer TFM (1,3,6) – 1.0

Foam mixer TFM(1,3,6)-1.0) is an independent product and it is intended for the injection of the foaming agent into the water flow from the tanker of the foam extinguishing fire truck. The foam mixer is used to form foam in foam generators of medium multiplicity according to GOST R 50409-92, in air-foam branch-pipe according to GOST R 50399-92 and four-jet grid foam generators FJFG.

The trunk foam mixer is installed in pressure hoses if it is necessary to ensure high costs of foaming solution for powering foam lifts with two or three GPS-600 or one GPS-2000 foam generators.

It is necessary to use synthetic foaming agents (type PO-6-TS-V TU 0258-147-05744685-98) during the work with foam mixers.

The trunk foam mixer is made of stainless steel.

Specification

Operating pressure, MPa:: 0,4 – 1‚0

Conditional passage of the water pressure line at the inlet, mm:: 125

Conditional passage of the foam pressure line at the outlet, mm:: 2х80

Conditional passage of the pressure line of the foaming agent at the inlet, mm:: 50

Dimensions of the foam mixer (LxWxH) mm, max:: 800х600х300

Weight of the foam mixer, max:: 25

Service life, years:: 10

Trunk foam mixer TFM (1,3,6) – 1.0